You are here
Tygon S3™ A24-C Milk Tubing
Black, Vacuum Tubing for Milking Equipment
Ideally suited for supply air transport, Tygon S3 A24-C milk tubing features a smooth inner surface that is less susceptible to particle entrapment, which can restrict air flow, and helps to reduce maintenance. Tygon S3 A24-C milk tubing is designed to work in tandem with Tygon S3 M-34-R tubing to provide vacuum and easy flow within the milking process.
Every foot of Tygon S3 A24-C milk tubing is embedded with a white stripe within the tubing walls. The trademark stripe is your assurance of receiving genuine Tygon S3™ tubing, the world's finest raw milk collection tubing produced specifically for the dairy industry.
Saint-Gobain is proud to be among the first companies to offer sustainable, flexible tubing products and Tygon S3 A24-C milk tubing is now phthalate-free. The bio-based Tygon S3™ line from Saint-Gobain Performance Plastics combines the high-performance standards customers demand with an eco-friendly tubing design.
Features and Benefits
- Holds full vacuum at room temperature
- Will not crack and age like rubber tubing
- Lightweight and flexible for quick installation
- Non-wetting properties allow easy cleaning and complete drainage
- Durability for long and reliable service
- Contains no BPA or phthalates
- To be used in conjunction with Tygon S3™ M-34-R milk tubing
Typical Applications*
- Raw milk transport lines
- Dairy processing
*For complete compliance information and appropriate use instructions, please refer to the detailed document of compliance. The complete compliance information and use instructions can be found in Related Documents.
| Property | ASTM Method | Value or Rating |
|---|---|---|
| Tensile Strength, psi (MPa) | D412 | 1755 (12.1) |
| Brittleness by Impact Temp., °F (°C) | D746 | -32 (-36) |
| Durometer Hardness (Shore A), 15 Sec | D2240 | 56 |
| Maximum Recommended Operating Temp., °F (°C) | - | 165 (74) |
| Specific Gravity | D792 | 1.21 |
| Tear Resistance, Ib-f/in (kN/m) | D1004 | 177 (31.0) |
| Tensile Set. % | D412 | 95 |
| Ultimate Elongation | D412 | 425 |
| Water Absorption, % at 73°F (23°C) for 24 hrs | D570 | 0.21 |
| Regulation | |
|---|---|
| NSF | |
| Japan MHLW Notification No. 370, Section 3-D | |
| Regulation (EU) No 10/2011 | |
| Regulation (EC) No 1935/2004 | |
| 3-A | |
| FDA | |
| OEHHA California's Proposition 65 |
