Versilon™ CT-Flex corrugated FEP or PFA tubing shapes and flexes easily and will conform to tortuous paths. It features a bend radius of virtually zero, can be extended or compressed without affecting the inner diameter. It resists chemicals, elevated temperatures, cut-through and strain. CT-Flex is made from FEP, has read-through transparency and is FDA approved under regulation 21 CFR 17.1550.
The non-wetting surface of CT-Flex means easy clean-out, so that batch-to-batch contamination is not a problem. FEP contains no plasticizers or fillers to leach out and contaminate the product stream.
CT-Flex corrugated tubing is also available in PFA, and with the diameter of the straight cuff outer diameter size for use with compression fittings (fittings of PFA with locking ring are also available for outer diameter sizes tubing).
|Property||ASTM Method||Value or Rating|
|Tensile Stress @ 200% Elongation, MPa||-||—|
|Brittleness Temp., °C||-||—|
|Compression Set Constant Deflection, % @ 70°C for 22 hrs.||-||—|
|Durometer Hardness (Shore A), 15 Sec||-||—|
|Maximum Recommended Operating Temp., °C||-||—|
|Tear Resistance, kN/m||-||—|
|Tensile Set, %||-||—|
|Tensile Strength, MPa||-||—|
|Ultimate Elongation, %||-||—|
|Water Absorption, % 24 hrs. @ 23°C||-||—|